|Antminer S19 95T Asic Miner Machine
|Antminer S19 95T
|APW12 All In One
|BTC And BCH
SHA256 BTC Asic Miner Machine,
4 fans Asic Miner Machine,
bitmain antminer s19 95t
Antminer S19 95T Asic Miner Machine Bitmain original power 3250W Mining BTC SHA - 256
Rated computing power: 95TH/s; Energy efficiency ratio: 34.5J/TH±5%; Wall power consumption: 3250W±5%
The Antminer S19-95T is packaged in an industrial reinforced carton with a high-density pearl foam cover inside, and the innermost layer is covered with an Antmineri-static dust-proof bag. The overall packaging is tight and safe.
Antminer S19-95T adopts aluminum alloy profile electromechanical integrated design, parallel four-fan structure, bare metal size 400*195.5*290mm, net weight of the whole machine is about 14.4 kg
After removing the fan, you can see the removable hash board design. Unscrew the two screws at the top of the connection with the power supply, unplug the main control board connection line, and the hash board can be easily pulled out. There are multiple power board tracks at the bottom of the chassis, leaving more space and possibilities for future transformation.
The top detail, the wiring between the power supply, hashrate board and the main control board is neat. In addition to the power cord and data cable, there is also a voltage regulating line connecting the main control board and the power supply, which is responsible for regulating the voltage of the power supply during the operation of the mining machine. .
The front and back of the hash board, two heat sinks on the front, light in the front and heavy in the back, are pasted with silicone grease and reinforced with spring screws.
There are 77 independent heat sinks on the back of the hashrate board, which can effectively improve the heat dissipation capacity. They are fixed by welding process. The contact surface is firm and tight, which effectively prevents violent transportation and loosening and falling off during the process of loading and unloading. The density of the heat sink is consistent with the chip arrangement density.
The power supply model of Antminer S19-95T is the newly designed APW12, which has a higher conversion rate and stronger than S17 power supply APW9. Open the box cover to see three Nidec fans arranged side by side. Compared with the 40mm fan of the S17 series power supply, the S19 power supply fan is upgraded to 60mm, the fan speed is reduced, and the heat dissipation channel is enlarged, and the power failure rate will also decrease.
The power consumption of the S19 wall is 3250W±5%, so it is necessary to ensure that the power socket for the miner is greater than 10A. Antminer does not have a power cord when it leaves the factory, so you need to prepare two quality power cords in advance.
The user panel not only can intuitively see the real-time computing power, network status, fan speed and temperature of the mining machine, but also accurately locate the operating status of each computing board and the operating status of each chip. The status of the whole machine is clear at a glance. The interface Clear and very user-friendly.
|Antminer S19 (95Th)
|195 x 290 x 400mm
|5 - 40 °C
|5 - 95 %
Contact Person: Anna